 Friends links |
|
| Picture |
Heading |
Updated |
 |
SAE Split Flange Clamps
SPLIT FLANGE CLAMPS(CODE 62),Code 61 Split Flange Clamp series.1.Split Flange Clamps, SAE J518 define the four blot split flange half, also be equal to BS ISO 6162-1/2:2012 version, it is a hydraulic flanged tube, pipe, hose connection. Flange connection |
2025-04-04 |
 |
SAE 3000 psi flange clamps
SAE 3000 Flange Clamps: one-piece flange clamp system
Introduction of hydraulic fluid power- flange connections with one-piece flange clamps and metric or inch screws:
1.Working pressure of SAE code 61 series flange clamps is 3000 PSI, 3,5 MPa (35 |
2025-04-04 |
 |
DIN Fittings Swivel
1. Definition: 24°DKO swivel connector is according to DIN 3861/DIN EN ISO 8434-4 standard, this end including Fitting body, Nut, O-ring and thrust wire (assembly). There are two types of usage, One is 24°welding cone type nipple (will need nut and o-ring |
2025-04-04 |
 |
Hydraulic Fittings DIN Union
1. Definition: DIN 24°cone connections is according to standard of DIN 3861/ISO 8434-1dimension, it is German DIN(DEUTSCHE INDUSTRIAL NORME) type. Union type require the all tube end size is the same as DIN 3861 required 24 deg cone from tube to tube.2. M |
2025-04-04 |
|
